PCM-CAN-2-ISO
Dual Channel PC/104 CAN Module Provides 1000V Isolation
For Automotive and Industrial Applications
February 12, 2013, Arlington, TX – WINSYSTEMS introduces their PCM-CAN-2-ISO, a PC/104-compliant, dual channel, isolated Controller Area Network (CAN) module with Windows and Linux drivers available. The board employs high-speed isolated data couplers and power supplies to provide 1000V protection between the two NXP SJA1000 CAN controllers and the network interface. This makes the module ideal for operation in high-voltage renewable energy, high-speed industrial control, or unpredictable automotive applications, while it maintains low EMI and low-latency operation. Each CAN channel can provide isolated +5VDC power or receive isolated +5V to +12VDC power from the interface for additional flexibility. The +5VDC power supply includes overvoltage, overcurrent, and short-circuit protection.
The PCM-CAN-2-ISO is compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID). CAN is an industry-standard, serial, asynchronous, multi-master communication protocol for connecting electronic control modules, sensors, and actuators in automotive and industrial applications. The PCM-CAN-2-ISO supports transfer rates to 1 Megabits per second and has jumper selectable termination resistors so it can be used in various topology systems.
WINSYSTEMS offers this board in other off-the-shelf configurations. The PCM-CAN-2 is a dual channel, non-isolated unit. The PCM-CAN-1 is a single channel, non-isolated unit. The PCM-CAN-1-ISO is a single channel, isolated unit. Special OEM configurations are possible. All configurations will operate over the industrial temperature range of -40° to +85° Celsius.
AVAILABILITY AND PRICING
Delivery is from stock. Please contact WINSYSTEMS’ Application Engineering Group for pricing; telephone: +1 817.274.7553, Fax: 817.548.1358, and e-mail: info@winsystemsworking.flywheelsites.com.
PRODUCT PAGES
PCM-CAN-2-ISO Dual Channel Isolated Control Area Network PC/104 I/O Module:
Product Page https://winsystems.com/PCM-CAN-2-ISO.cfm
PCM-CAN-2 Dual Channel Control Area Network PC/104 I/O Module:
Product Page https://winsystems.com/PCM-CAN-2.cfm
PCM-CAN-1-ISO Single Channel Isolated Control Area Network PC/104 I/O Module:
Product Page https://winsystems.com/PCM-CAN-1-ISO.cfm
PCM-CAN-1 Single Channel Control Area Network PC/104 I/O Module:
Product Page https://winsystems.com/PCM-CAN-1.cfm
ABOUT WINSYSTEMS
Founded in 1982, WINSYSTEMS designs and manufactures embedded single board computers (SBCs), I/O modules, and Panel PCs which operate over extended temperatures. Product lines include rugged, compact standards such as 3.5-inch SBC, COM Express carrier boards, PC/104, PC/104-Plus, EPIC, EBX, SUMIT-ISM, and STD Bus. These products are engineered for harsh, rugged environments which include industrial control, transportation, Mil/COTS, medical, and communications applications. Well known for expert technical support and helpful customer service, WINSYSTEMS is an employee-owned company. WINSYSTEMS is located at 715 Stadium Drive, Arlington, Texas 76011, +1 817.274.7553, andhttps://winsystems.com.
WINSYSTEMS, Inc.
715 Stadium Drive
Arlington, Texas 76011 USA
Website: https://winsystems.com
E-mail: info@winsystemsworking.flywheelsites.com
Telephone: +1 817.274.7553
Fax: 817.548.1358